Installation of Aluminum Alloy Doors & Windows to Pay Attention to The 7 Details

Aluminum alloy doors and windows because of its stylish appearance and good physical properties by many homeowners and construction workers love, it can be said that aluminum alloy doors and windows in the modern home improvement and transformation has an extremely important role. Although aluminum alloy doors and windows because of its construction process is relatively simple, and the construction of small difficulties and other characteristics welcomed by the construction staff, but to install aluminum alloy doors and windows well, which there are many details that need to be dealt with in a timely way, so what are the noteworthy places? Here come with me to take a look at the installation of aluminum alloy doors and windows to pay attention to the 7 major details.

1. Before the installation of aluminum alloy doors and windows should be the shape and size of the door and window openings and the location of the accurate degree of proofreading, supervision and the construction side should check the number and location of pre-embedded concrete in accordance with the design requirements; at the same time, for the windows of the higher floors, it should be checked whether it is accessed in accordance with the provisions of the lightning protection belt; for the unqualified part should be supervised by the construction side to rectify the situation.

2. After the aluminum alloy doors and windows on the wall to use wooden wedge blocks to adjust the positioning, and then fixed with a nail, please note that it is prohibited to use iron nails, wooden wedges fixed. Next is the embedded seam treatment, embedded seam should be asked to supervise the team or construction team to make a good hidden project acceptance records (water and electricity remodeling and waterproofing works, etc.). And the verticality, level, diagonal angle of the windows and doors to check. Wooden wedges should be taken out in time after embedded joints to avoid being forgotten in the joints.

3. Oxidized wood windows and doors with cement mortar joints shall be treated with anti-corrosion and anti-rust treatment before they are put on the wall. Except for the window frames facing the external wall, all other surfaces of the window frames are protected with adhesive tape or plastic tape. It should be noted that the window frames facing the wall should not have the presence of adhesive tape or plastic tape, in order not to cause the bonding part of the link is not tight, making the waterproof performance is not good, so that seepage and leakage of water in the gap.

4. The waterproof glue between the aluminum alloy window frame and the wall can be applied only after the wall is completely dry. At the same time before applying waterproofing adhesive should be removed from the grass-roots level to remove dust and remove gravel treatment. If the wall is not completely dry, dust is not cleaned up, then the water vapor released from the wall will make the sealing effect of the waterproofing adhesive fails, and then the whole window leakage, water seepage.

5. After the groundwork for the installation of aluminum windows and doors has been completed, it is time to start installing the glass and windows, before which the protective adhesive or plastic tape should be cleaned up as well as the dirt in the window frame sector.

6. After the installation of aluminum alloy windows and doors of glass and sashes, should check whether the accessories are missed, whether the installation is firm, whether the opening and closing of the sashes is flexible, before acceptance, the external casement windows should be closed to prevent damage to the sashes caused by stormy weather.

7. Before acceptance should be cleaned and quality check of aluminum alloy doors and windows, can not use corrosive cleaners on aluminum profiles, glass and hardware; quality check out the problem should be solved immediately, the imperfections of the place to repair.